American National Standard for Performance and Classification for Puncture Resistant Gloves
ANSI/ISEA 105-2016 establishes performance levels, testing and classification for gloves designed to provide puncture resistance while performing occupational tasks.
Glove material sample
Sample taken from glove palm and secured between two plates in a sample holder.
Weight is added as force required, ranging between 10 to 150 newtons.
Blunt puncture test
A blunt probe is placed at 90º to the test material and force is applied to penetrate the fabric at 100mm/min.
Puncture resistant gloves
Test results are represented by levels 1 to 5, as depicted on the gloves. Level 5 is the highest level of protection.
NOT ALL PUNCTURE RESISTANT GLOVES PROTECT AGAINST NEEDLESTICK PUNCTURES.
When working with hypodermic needles and other fine objects, choose a glove tested
to the ASTM F2878 standard for resistance to needle puncture.
For the latest safety standards, classifications, testing criteria and ratings information, please refer to the appropriate governing body or association.
Information contained in this document is subject to change without notice. As BDG® cannot control or anticipate the conditions under which a product may be used, each user should review the information in specific context of the planned use. To the maximum extent permitted by law, Bob Dale Gloves and Imports Ltd., and/or its affiliates, employees or representatives will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this sheet. No express or implied warranties are given other than those implied mandatory by law. BDG® products are not cut and puncture proof. Do not use with moving blades, tools or serrated blades.